Last time I wrote about the 4P1L in screen mode. It was great to see some DIYAudio member (Blitz) to post about his work on the 4P1L with screen as anode. I call it screen mode but probably is incorrect.
His post about G3 structure remind me to post this, I have tested it but never blogged about it. Yes having G3 as part of the anode structure will increase conductance and will form a nice “mesh” anode. Here it is how I implemented:
The pin 4 (G3) is now connected to 3 (G2) to form the anode. I reduced the anode voltage down to 110V to get 10mA. It could be increased, sure within the Pd limits.
The response is very good:
Here you have the distortion at 1kHz:
How does it sound?
Well, I wrote about it before. The 4P1L is one of my favourite valves. In this mode it sounds great, with a particular clear detail in the treble. I like this valve and will play it for some time to get further impressions.