Tag: 813 SE

6SF5 driver for 300B/GM70/813 SE Amps

Some years ago my friend Paolo brought up this lovely valve which looking at the curves seemed to be a great candidate for a driver which required large voltage swing. This indeed is needed for 300B, 211/GM70, 813 SE Amps. I build it and tested with the 300B, which is great.

The immediate challenge (and probably the reason why it hasn’t been used extensively in the past) is that has a high anode resistance as well as very low current capability. These 2 things are of course a killer for driving these demanding output valves. However, with a gyrator load and a follower stage, the reality is different

 

6SF5 driver

Continue reading “6SF5 driver for 300B/GM70/813 SE Amps”

813 triode SE with 4P1L Pentode

A monster DHT amp

Lately I haven’t had any time for audio work unfortunately. Changing nappies to a 4 week old baby whilst working long hours is tough. I can get the odd 30 minute here and there and every time I try to get upstairs to the workshop something pops up. Never mind, hopefully things will get easier in the near future.

I’ve been asked about the 4P1L pentode driver. It’s been a long time since I did those tests and never got around to listen to the driver sound. Tests were promising but never managed to include this driver on my amp.

Driving transmitting valves is a challenging task. Especially if we want to take them to A2-land (unless they operate in A2 whilst in zero grid bias). Driving big transmitting valves like 211, 805, 845, 813 or GM-70 require a large swing of volts for the driver which should do this linearly. The load is quite demanding in particular when we approach the grid to 0V (or biased positively) and using a triode as driver also puts a daunting task to the previous stage due to the Miller effect. It’s not easy to find triodes that can swing 300Vpp with very low distortion.

Continue reading “813 triode SE with 4P1L Pentode”