I’ve received several emails from people asking me why I’ve gone quite lately. Nothing to be alarmed, I’m just simply buried on the daily grind like many out there are on these Pandemic times. My work-life balance has changed dramatically. This left me with very little time on my hands to work on audio stuff. I won’t complain as many others are actually struggling to survive, that is tough.
Tag: 845
813 triode SE with 4P1L Pentode
A monster DHT amp
Lately I haven’t had any time for audio work unfortunately. Changing nappies to a 4 week old baby whilst working long hours is tough. I can get the odd 30 minute here and there and every time I try to get upstairs to the workshop something pops up. Never mind, hopefully things will get easier in the near future.
I’ve been asked about the 4P1L pentode driver. It’s been a long time since I did those tests and never got around to listen to the driver sound. Tests were promising but never managed to include this driver on my amp.
Driving transmitting valves is a challenging task. Especially if we want to take them to A2-land (unless they operate in A2 whilst in zero grid bias). Driving big transmitting valves like 211, 805, 845, 813 or GM-70 require a large swing of volts for the driver which should do this linearly. The load is quite demanding in particular when we approach the grid to 0V (or biased positively) and using a triode as driver also puts a daunting task to the previous stage due to the Miller effect. It’s not easy to find triodes that can swing 300Vpp with very low distortion.