Tag: Bartola hybrid mu-follower

01a Preamp by Nash

 

It’s always satisfying to see someone else enjoying the end result of their build work. Here’s a great example of Nash building his take on the 01a low gain DHT pre-amp:

Hi Ale,

Its now over two months since I have been listening to your low gain version of the 01A preamp in concert with a Slagle AVC after it.

Over a span of a few years I have built several preamps and I can honestly say that this one is substantially better than any of the others. As a classical music fan I value attributes like clarity, timbre, body, weight and speed and your design delivers! I would like to use the analogy of a superb cake with icing- the cake is the 01A pre and the icing is the AVC. Thank you for a great design!

I have recently replaced RMu and the divider resistors with the TT Electronics PFC series SMD resistors mounted on a 1206 adapter. These are tantalum nitride resistors and they sound wonderful in this application. 

Further, I am getting interested in your 300B SE builds. Are you using a preamp before these? Please send me a link to your latest work in this area which you feel I should consider.

Regards,
Nash Bapasola  in NJ

Continue reading “01a Preamp by Nash”

801a preamp revisited (part I)

It’s been a long since I last posted here some project stuff. I’ve been busy with work and family. On my spare time, spent mostly listening to music, developing some synthesiser modules and playing music as well!

I missed ETF this year, sad to say. Work commitments made it impossible to  travel to France. Hope that’s not the case next year as am keen to get back. I’ve seen some pictures and feedback and seems it was a blast despite the COVID restrictions.

On my exchange with Rod Coleman regarding this post, I asked him to send me a pair of his latest DHT filament regulator (version 9) to test them on my 801a preamp with a cathode bias resistor (degenerated or un-bypassed):

Continue reading “801a preamp revisited (part I)”

The low gain DHT pre-amp library

For more than 10 years I’ve been experimenting, designing and enjoying DHT pre-amps. Without over-dwelling on this subject, to me DHT preamps bring the unique sound transparency and detail we all seek for. They can make night or day difference in any system. And is not about gain, hence I’m focusing on sharing this blog entry.

Continue reading “The low gain DHT pre-amp library”

300B SE Amplifier Finished!

When everything was going to plan…

This build became one of the quickest and eventually the most painful from all, perhaps not really. However, it was very challenging in the end. I will tell you why in more detail. Yet, it has been a fantastic learning experience.

Continue reading “300B SE Amplifier Finished!”

D3a driver w/ Rev08 board

A friend from Canada ordered a pair of boards and I used the opportunity to test the newly arrived hybrid mu-follower (aka as gyrator) Rev08 PCBs.  He will be using these boards in the 300B design posted here.

Continue reading “D3a driver w/ Rev08 board”

300B Emission Labs

Back at the beginning of the year I purchased a pair of Emission Labs 300B for my new amplifier version (still working on it). I own several 300Bs but was keen to try these out given their reputation.

Jac from JacMusic sent me a matched pair which I traced them with the eTracer:

Continue reading “300B Emission Labs”

Hybrid Mu-follower (aka Gyrator) Rev08 PCB Update

It’s been far too long since I last posted on this blog. With the limited spare time I’ve got these days, I concentrated in setting up the new workshop and system since we moved back to our place. I’m nearly there, so now it’s time to get back to work

I made some updates to the “gyrator” PCB. I’ll stop referencing it gyrator from now on, since the name is misleading. However, it got popular that way. Nevertheless, it’s a hybrid mu-follower circuit but if only if you take the output from the anode, it behaves like a “gyrator” from a frequency response perspective. If you’re interested in this circuit in more detail, please read the lecture I gave last year at ETF.18. You can download it from here.

Back to the board, here are the few changes made:

  1. Moved the trimpot P1 for easier fixing of the board with the M3 standoffs.
  2. Added a gate stopper resistor (R9) to avoid oscillation at low anode current (<10mA) when using high-gm MOSFETs in the lower position J4. This was evident with devices like BSH111BNK
  3. Added an LED (D4) indicator and a series resistor (R8) at the drain of M3. This enables indication of:
    1. Normal operation subject to  value of R8
    2. Source current into load (e.g. like in A2 operation) subject to value of R8.
    3. Short output to ground. Depending on duration and current limitation of power supply, this may prevent damaging M3 MOSFET. Not guaranteed, but in some scenarios will work.

Continue reading “Hybrid Mu-follower (aka Gyrator) Rev08 PCB Update”