Images

Finished the second channel and tested the filament supply. The filament array which is formed by two paralleled pairs of 20W 10Ω wirewound resistors gets hot as expected. The array temperature is about 110-126°C at an ambient temperature of 24°C. The anode of the 46 gets to 49°C after 20 min of use and the heatsink stays at 42°C whereas the regulator TO-220 transistors are about 45°C. There is about  30W dissipated on each array. Yes I know, a lot of power but the filament bias is hard to beat in terms of sound in my view.